Complete Structural Solutions

45#/ASTM 1045/C45/S45C Seamless Carbon Steel Pipe

45#/ASTM 1045/C45/S45C Seamless Carbon Steel Pipe

The EN 10083-2 GRADE C45 Carbon Steel Seamless Pipes and Tubes range in tensile strength up to 430MPa. There are cold rolled, hot rolled and cold worked pipes and tubes in the Grade C40/c45e Cs Pipe specifications. The material has high strength but not high hardness as the high carbon steel pipes. They can be hardened by carburizing
Contact us

Product introduction

The EN 10083-2 GRADE C45 Carbon Steel Seamless Pipes and Tubes range in tensile strength up to 430MPa. There are cold rolled, hot rolled and cold worked pipes and tubes in the Grade C40/c45e Cs Pipe specifications. The material has high strength but not high hardness as the high carbon steel pipes. They can be hardened by carburizing procedures. The low carbon content in the Bs En 10083-2 C22e/c35 Pipe can be welded with conventional welding methods. Since the material transfers heat well, it can withstand welding point heat but preheating and filler materials might be necessary depending on the welding type and the application requirements. The pipes can be ERW, EFW, fabricated or EN 10083-2 C45 Seamless Tubes by production type. The pipes and tubes are flexible and are used in marine, food processing, petroleum and oil and gas industries.

Product Parameters

EN 10083-2 C45 Carbon Steel Seamless Pipes Specification
Standard AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe
Steel C45 En 10083-2 EFW Pipe size 5.0 mm – 1219.2 mm
Steel Bs En 10083-2 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Steel Bs En 10083-2 Welded Tube Size 6.35 mm OD To 152 mm OD
Carbon Steel En 10083-2 C45e Tube wall thickness 0.020″ –0.220″, (special wall thicknesses available)
Carbon EN 10083-2 Grade C45 Steel Length Single Random, Double Random, Standard & Cut length Pipe & Tube
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts, EN 10083-2 Gr C45 Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)
EN 10083-2 Gr C45 Form Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc
Steel C45 En 10083-2 Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
EN 10083-2 C45 Carbon Steel Seamless Pipes Properties
Chemical Properties
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
0.42-0.50 max 0.40 0.50-0.80 0.045 0.045 max 0.10 max 0.40 max 0.40 – –
Mechanical Properties
Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
620 – – 14
Equivalent Designation
DIN EN BS NFA ASTM ASME
DIN 17204 Grade C45 EN 10083-2 Grade C45 NFA A35-552 Grade XC 48 H 1 ASTM A519 Grade 1045 ASME SA 519 Grade 1045 –
EN 10083-2 C45 Carbon Steel Seamless Pipes Standard length tolerances
Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0
Scroll to Top