Seamless Structural Steel Pipe
Structure seamless steel pipe is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging, subject to certain qualifications. structural pipe is a type of steel construction pipe
- Email : info@global-steel.net
- Contact : 9324799893 / 9920397998
Product introduction
structural pipe is a type of steel construction pipe that meets certain standards of chemical composition and mechanical properties. This pipe can be used for a wide variety of structural applications and there are variety of types of structural pipe available. Common types of structural pipe include:Seamless Steel Pipe: Seamless steel structural pipe is a durable pipe product that is commonly used for dock piling, pipe piling, caissons, and bollardsStandard: GB/T8162-1999, ASTM A53, ASTM A106, ASTM A500-98, ASTM A501-98, ASTM A519-98, JIS G3441-1994, JIS G3444-1994, BS EN 10210-1
| Product: | Structural Seamless Pipe, Seamless Structural Pipe |
| Application: | Used in the general structure and the mechanism Industry |
| Size: | OD: 114mm-914mm |
| WT: 4mm-60mm | |
| LENGTH: 5.8/6/11.8/12m | |
| Pipe Standard: | ASTM A53 ASTM A519 ASTM A500 |
| JIS G3444 | |
| DIN1629 EN 10210/10219 |
Stainless Steel Seamless Structural Pipe Dimension
| Type | Seamless steel pipe |
| Specification | 114-914MM×4-60MM |
| Diameter | 114MM-914MM |
| Thickness | 4MM-60MM |
| Length | 5.8/6/11.8/12m,According to your requirements |
| Special pipe | Regular and special thick-walled structure steel pipe, maximum thickness of up to 60MM |
| Process | Hot rolled and hot expanded |
| Application | Our high quality structure steel pipes are highly sought after by customers from supplying, petroleum, natural gas, transportation and construction industries. |
| Standard | GB/T 8162—2008, GB/T 8163—2008, ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A210, ASTM A333, DIN1629, DIN2448, DIN17175, EN10216, EN10204, EN10297 etc. |
| Material | 20#, Q345B, ST52, S355JRH, ST37, 10#, A106/A53 GR.B |
| Oil & Gas Sector | |
| API | 5L |
| API | 5CT |
| IS | 1978, 1979 |
| Automotive Industry | |
| ASTM | A-519 |
| SAE | 1010, 1012, 1020, 1040, 1518, 4130 |
| DIN | 2391, 1629 |
| BS | 980, 6323 (Pt-V) |
| IS | 3601, 3074 |
| Hydrocarbon Process Industry | |
| ASTM | A-53, A-106, A-333, A-334, A-335, A-519 |
| BS | 3602,3603 |
| IS | 6286 |
| Bearing Industry | |
| SAE | 52100 |
| Hydraulic Cylinder | |
| SAE | 1026, 1518 |
| IS | 6631 |
| DIN | 1629 |
| Boiler, Heat Exchanger, Superheater & Condenser | |
| ASTM | A-179, A-192, A-209, A-210, A-213, A-333, A-334,A-556 |
| BS | 3059 (Pt-I Pt-II) |
| IS | 1914, 2416, 11714 |
| DIN | 17175 |
| Railways | |
| IS | 1239 (Pt-I),1161 |
| BS | 980 |
| Mechanical, Structural General Engineering | |
| ASTM | A-252, A-268, A-269, A-500, A-501, A-519, A-589 |
| DIN | 1629, 2391 |
| BS | 806, 1775, 3601, 6323 |
| IS | 1161, 3601 |